Iron II and III Reagent Set (100 tests) – HI96777-01

Surface water typically contains up to 0.7 mg/L of iron. Drinking water typically contains up to 0.3 mg/L of iron, but this level may increase significantly if plumbing fixtures contain iron. In well-oxygenated, non-acidic waters, iron exists mainly in the ferric form (Fe³⁺) and will precipitate as iron oxide hydroxide (FeO(OH)). However, anoxic water may have high levels of dissolved ferrous iron (Fe²⁺), which could precipitate in heating/cooling systems or other equipment after exposure to air. The Iron (II)/(III) method can be used to distinguish between the ferrous (Fe²⁺) and ferric (Fe³⁺) forms of iron in a 2-step measurement process.

The HI96777-01 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. These reagents use an adaptation of Standard Methods for the Examination of Water and Wastewater, 23^rd Edition, 3500-Fe B, Phenanthroline Method. During the first measurement, ferrous iron (Fe²⁺) reacts with 1, 10-phenanthroline to form an orange-red complex. During the second measurement, ferric iron (Fe³⁺) is converted to ferrous iron (Fe²⁺) by the addition of Reagent B; the resulting measurement is the sum of ferrous (Fe²⁺) and ferric (Fe³⁺) iron.

Specifications

Manuals

Iron II and III Reagent Set (100 tests) – HI96777-01