{"product_id":"ph-electrode-for-process-control-and-monitoring-hi1001","title":"pH Electrode for Process Control and Monitoring - HI1001","description":"\u003cp\u003eThe HI1001 uses a spherical bulb,  PVDF body,  and PTFE junction with polymer electrolyte.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eSpherical Glass Tip\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe spherical shaped tip design allows for a wide area of contact with the sample. This permits a faster electrode response with a higher degree of stability. The bulb is protected by a PEI sleeve that gives the electrode resistance against mechanical stress.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003ePVDF Body\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003ePolyvinylidene fluoride (PVDF) is a plastic that is resistant to most chemicals and solvents. It has high abrasion resistance,  mechanical strength,  and resistance to ultraviolet and nuclear radiation. PVDF is also resistant to fungal growth.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003ePTFE Junction\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis type of junction is often used on electrodes with polymer electrolytes. Porous polytetrafluoroethylene (PTFE) is a hydrophobic material that is available with different porosities that helps to minimize clogging. Because of its chemical advantages,  PTFE is widely used in industrial applications.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eDouble Junction Reference\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eA double junction electrode has an internal compartment surrounding the reference wire. Silver ions are present in the polymer electrolyte of the internal compartment,  which houses the Ag\/AgCl reference wire; the electrolyte outside this compartment is silver-free. The double junction design means that virtually no silver from the electrode enters the sample. This design allows measurement in applications where silver ions in the sample are undesirable or silver precipitates on the junction are likely to form\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eBNC Connector\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe HI1001 uses a BNC connector. This type of connector is universal in that it can be used on any pH meter that has the female BNC probe input.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eExternal Thread\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe ½” NPT thread of the HI1001 front end allows for in-line installation while the 3\/4\" threads on the back end (cable side) allows for submersion mounting.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e HI1001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eName\u003c\/td\u003e\n\u003ctd\u003e pH Electrode for Process Control and Monitoring - HI1001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription\u003c\/td\u003e\n\u003ctd\u003e process pH probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJunction Type\/Flow Rate\u003c\/td\u003e\n\u003ctd\u003e double, PTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType of Electrolyte\u003c\/td\u003e\n\u003ctd\u003e polymer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody Material\u003c\/td\u003e\n\u003ctd\u003e PVDF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGlass Type\u003c\/td\u003e\n\u003ctd\u003e high temperature - HT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTip \/ Shape\u003c\/td\u003e\n\u003ctd\u003e spherical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Pressure\u003c\/td\u003e\n\u003ctd\u003e 6 bar (87 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature Operating Range\u003c\/td\u003e\n\u003ctd\u003e -5 to 80˚C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody Length\/Overall Length\u003c\/td\u003e\n\u003ctd\u003e 86 mm (3.4 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable\u003c\/td\u003e\n\u003ctd\u003e 3m coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003e BNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eManuals\u003c\/h3\u003e\u003cp\u003e\u003ca target=\"_blank\" href=\"https:\/\/manuals.hannainst.com\/HI1001\"\u003epH Electrode for Process Control and Monitoring - HI1001\u003c\/a\u003e\u003c\/p\u003e","brand":"Hanna Instruments","offers":[{"title":"Default Title","offer_id":67871187796337,"sku":"HI1001","price":18962.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1086\/9535\/5761\/files\/hi1001.jpg?v=1792645844","url":"https:\/\/hannainst.in\/products\/ph-electrode-for-process-control-and-monitoring-hi1001","provider":"hanna","version":"1.0","type":"link"}