Skin and Scalp pH Tester - HI981037

Electrode features:

The flat tip of the pH electrode provides optimal contact between the skin or scalp, and the sensor. The pH electrode has an open junction design and utilizes a non-flowing gelled reference electrolyte. The flat tip allows the pH sensing surface and reference junction come into contact with the skin or scalp, and equilibrate quickly and reproducibly.

•  Flat glass tip: The flat tip provides optimal surface contact for skin or scalp pH measurements, and for surfaces that cannot be penetrated.

• Specialized glass formulation: Specialized low temperature (LT) pH glass ensures fast stabilization and accurate results at lower temperatures.

• Open junction reference: The open junction design uses a solid gel interface between the skin or scalp, and internal Ag/AgCl reference. This interface not only prevents silver from exiting the junction, but also makes it impermeable to clogging, resulting in a fast response and stable reading. This design allows for smaller sample sizes as there is no junction to submerge

We believe that buying a tester should be simple. Your Skin & Scalp pH Tester is equipped with everything you need for successful testing right out of the box.

Cleaning and Disinfection Solution

Your Skin pH Tester comes with all the required solution like cleaning and disinfection solution for skin residual.

pH 4 and pH 7

When performing a pH calibration it is important that the correct buffers are used. We include some start buffers to get you going. The single-use sachets are individually sealed so you use fresh buffer each time you calibrate.

Storage Solution

Proper storage of your electrode will ensure reliable measurements and a long electrode life. Our storage solution is specially formulated to keep the pH glass hydrated while minimizing organic growth.

Features at-a-glance

Large LCD

• Displays the measurement reading, stability indicator, low battery indicator, and calibration tags.

Automatic Calibration

• This pH tester is calibrated automatically to one or two points. Buffers are recognized automatically and after calibration, buffer values used are shown on the display.

Stability Indicator

• An hourglass indicator is displayed on the LCD until a stable reading is obtained.

Automatic Shut-off

• The meter can be set to automatically turn off after 8 minutes or 60 minutes to conserve battery life in the event that the meter is left on. The auto-off feature can also be disabled.

Probe Diagnostic

• During calibration the meter will display error (Err) message as an indicator that the probe needs to be cleaned.

Low Battery Indicator

• The skin & scalp pH tester has an exceptional battery life of approximately 1000 hours. When the battery power is running low, a low battery indicator is displayed.